lldp holdtime

Configures the LLDP holdtime to hold the information received by the neighbor device before discarding it.

Syntax

lldp holdtime seconds

no lldp holdtime

holdtime seconds: Specifies the amount of time in seconds. Valid range is 10 through 65535. Default value is 120 seconds.

Config mode

The no lldp holdtime command resets the holdtime to the default holdtime of 120 seconds.

The following example configures the lldp holdtime to 10 seconds.

device# configure terminal 
device(config)# lldp holdtime 10 
device(config)# 

Show running:  
device# show running-configuration 
lldp holdtime 10